Fermentation Accessories
Carboy Accessories
| Description |
Price |
Add to
Cart |
BLOW-OUT
TUBE If the three, five, or six gallon glass carboys
are used as a Single-Stage fermentor we strongly recommend
using a 4 ft. section of 1” inside diameter tubing as
a blow-out tube. Smaller diameter tubing or fermentation locks
stuck in the top of the carboy can clog up (commonly) and
cause either a large mess when the carboy breaks, or a dangerous
situation-glass under pressure. The blow-out tube fits tightly
into the neck of the carboy while the other end is stuck into
a vessel of water. Two days later the blow-out tubing may
be replaced by a fermentation lock. 4 ft of 1” inside
diameter tubing
|
$5.95 |
|
BREW
BELT Wraps around a carboy or other fermentor and
keeps a constant 60F.
|
$23.95 |
|
CARBOY
CAP A universal rubber carboy cap having two holes.
One can use used for a Syphon tube while the other can be
used for a blow-out tube or fermentation lock.
|
$3.95 |
|
RACKING
TUBE A rigid plastic tube with a curved top which
fits our basic syphon tubing. It has an end which draws from
above the sediment when racking. 30” Orange tip. Fits
3/8” tubing best (most accessory items)
|
$4.50 |
|
½”
RACKING TUBE
|
$4.95 |
|
RACKING
TUBE REPLACEMENT CAP
|
$0.80 |
|
STAINLESS
RACKING TUBE Will last a lifetime.
|
$15.95 |
|
SYPHON
TUBE HOLDER Fits standard carboys. Holds racking
tube above, or tubing firmly in place while siphoning.
|
$3.50 |
|
RACKING
TUBE HOLDING CLAMP Attaches to primary buckets and
holds tubing while siphoning.
|
$2.95 |
|
CARBOY
HANDLE A plastic coated handle that attaches to the
neck of carboys and makes lifting easier. When lifting full
carboys, care should be taken to support the bottom of the
carboy so full weight is not carried by handle alone or the
neck of the carboy could break. Does not fit 6 ½ gal
carboys without some effort.
|
$5.50 |
|
CARBOY
HANDLE Same as above. Fits 6.5 gal carboy
|
$5.95 |
|
CARBOY
FUNNEL A special funnel with a tapered end that fits
into carboys. (Most funnels are too large to fit). 9”
diameter. With slot for screen
|
$11.95 |
|
SYPHON
KIT Contains a racking tube, bottle filler, and 4’
section of tubing.
|
$9.95 |
|
FERMTECH
5/16” AUTO-SYPHON. Our favorite. Starts syphon
with a single stroke in as little as an inch of liquid. Includes
a 24” racking tube.
|
$10.95 |
|
FERMTECH
½ AUTO-SYPHON Larger size, 26” long
with a ½ racking tube. Great for winemaking.
|
$13.50 |
|
REFRIGERATOR
THERMOSTAT If you plan to ferment in your refrigerator
you will need this thermostat to hit the temperatures you
need. Plug it in and it’s ready to go.
|
$84.95 |
|
THE
THIEF A wine thief large enough to hold a hydrometer.
Take a hydrometer reading by inserting the Thief into beer
or wine.
|
$9.95 |
|
Bottle Fillers
Bottle fillers are rigid plastic
or metal tubes that have a spring action or gravity feed tip which
is pressed against the bottle bottom to fill and lifted up to stop
the flow as it is inserted into the next bottle.
These are handy and popular devices.
| Description |
| FERMTECH
BOTTLE FILLER Springless, gravity-style shut off.
Has connector for attaching to bucket spigot. $4.95;
½ BOTTLE FILLER Fills faster, 15” $5.25
|
| PHIL’S
PHILLER Stainless. The fastest bottle filler this
side of the Pacific. Fills a bottle in about 9 seconds. $23.95
|
| BUON
VINO AUTOMATIC BOTTLE FILLER This handy filler is
easily primed, self-leveling and automatically shuts off to
prevent accidental overflows. The tapered tip gently cascades
beer or wine into the bottle reducing the risk of oxidation.
$19.95
|
| BUON
VINO FILL-JET This product will make your life easier.
It is a free-standing , electric bottle filler that fills
a 750ml bottle in 17 seconds. It’s specially designed
tapered tip cascades wine into the bottle, and the pump is
self de-activating to help prevent overflows. It is self priming
and automatically shuts off. $263.96
|
Back to
Top
Rubber Stoppers
WHITE RUBBER STOPPERS With or without
hole for airlock are pure lab grade gum rubber. Odorless
| Description |
Price |
Add to Cart |
#
2 STOPPER Fits our Single-Stage fermentor. Also fits
beer and wine bottles and other ¾” openings.
Ideal for yeast starter bottles. |
$0.60 |
|
#
2 STOPPER with 2 drilled holes |
$0.75 |
|
#3,
4, 5 rubber stoppers each |
$0.65 |
|
#
5½ STOPPER Fits 1” openings |
$0.90 |
|
#
6 STOPPER Fits small-holed gallon cider jugs. |
$0.90 |
|
#
6½ STOPPER Fits carboys with 1 1/8”
opening, most carboys
|
$0.90 |
|
#
7 STOPPER Fits carboys with a 1¼” opening.
Also fits 500 ml Erlenmeyer Yeast Starter Flasks |
$1.50 |
|
#
8 STOPPER Fits large mouthed gallon jugs. 1 3/8”
x 1 5/8”
|
$1.60 |
|
#8½
STOPPER 1 7/16” x 1 11/16” |
$1.60 |
|
#
9½ STOPPER 1½” x 1 13/16” |
$1.80 |
|
#
10 STOPPER |
$2.25 |
|
#
10½ STOPPER 1¾ x 2 1/16” |
$2.45 |
|
#
11 STOPPER Fits most 50 gal barrels and other 1 15/16”
x 2¼”
holes |
$2.50 |
|
#
11½ STOPPER Fits square rigid, plastic HedPak.
2” x 2½”
|
$2.75 |
|
#
12 STOPPER 2 1/8” x 2 9/16” |
$3.50 |
|
#13
STOPPER 2 5/16” x 2 11/16” |
$4.50 |
|
#
14 STOPPER |
$7.95 |
|
#
15 STOPPER |
$12.75 |
|
SOLID
STOPPERS AVAILABLE IN THESE SIZES: 5½, 6½,
7,
7½, 10, 10½, 11, 12, 13, 14 15 Same price as
holed counterpart. |
Select |
|
UNIVERSAL
CARBOY BUNG Fits these glass jugs: 2.8, 3, 5, 6,
6.5. |
$2.75 |
|
Back to
Top
Stirring Spoons
Our stirring spoons are perfect
for stirring during boiling of beer, or for stirring wine must in
the primary fermentor. The plastic ones will not scratch ceramic
pots or plastic fermentors.
| Description |
Price |
Add to Cart |
| PLASTIC ROUND HEAD 18”
|
$3.25 |
|
| PLASTIC ROUND HEAD 24” |
$3.75 |
|
| PLASTIC ROUND HEAD 28”
|
$3.95 |
|
| PLASTIC PADDLE 18” |
$3.75 |
|
| PLASTIC PADDLE 28”
|
$3.95 |
|
| STAINLESS SPOON 22”
|
$9.95 |
|
| PLASTIC HIGH TEMPERATURE
SPOON |
$4.50 |
|
Back to
Top
Straining Bags
Straining bags are useful for containing
small amounts of grains or hops in the boiling wort, or for dry
hopping. They may also be used to fit into fermentors for straining
grains, wort, or fruit. Additionally,
they may be useful for sparging mashed grains.
| Description |
| MUSLIN
STEEPING BAGS Used to hold adjunct grains during
the steeping period before boiling. Can also be used to hold
hops for dry hopping.
Small 5” x 11”
$0.50
Large 5” x 28” (Holds 3-5 lb of grain) $0.75
10 BAGS $6.00
|
| NYLON
HOP BAG, 6” x 8” $4.50
|
| NYLON
STRAINING BAG
Small,
1O” x 18”, coarse $4.95
Small, fine $5.25
|
| JUMBO,
COARSE, 18”x 32". $8.95
|
| STAINLESS
STEEL STRAINER Very high quality. $25.95
|
Back to
Top
Mash & Lauter Tun
Moving from extract brewing to partial
or all-grain brewing usually means a step up in size of equipment,
and can also mean more equipment. There are many ways to mash and
sparge, and the more
complete beer books (see page 20) cover these techniques in detail.
| Description |
Price |
Add to Cart |
Phil’s
mashing and lauter tun - Many Homebrewers are looking
for convenient ways to do all grain brewing. Phil’s
mashing and lauter tun is a ready- to -use set of two buckets,
a lauter screen, brass sparging arm, and all tubing and clamps.
The brewer mashes in one container, sparges into the boiling
pot, while the other bucket drains hot sparge water into the
lauter bucket. Complete directions are included. We recommend
this as an easy way to get into partial-mash or all grain
brewing.
|
$43.95 |
|
PHIL’S
12” FILLER, stainless
|
$14.95 |
|
17”
FILLER, stainless
|
$16.95 |
|
COUNTERPHIL
COUNTERPRESSURE BOTTLE FILLER Using the syphon method
and a three-way valve, the filler requires only half the steps
required by other fillers
|
$48.95 |
|
PHIL’S
7” SPARGER Fits 5 gallon coolers
|
$15.50 |
|
8½”
SPARGER Fits 5 and 6 gallon buckets
|
$15.95 |
|
10”
SPARGER Fits 10 gallon coolers and half barrels
|
$16.95 |
|
PHIL’S
9” PHALSE BOTTOM Fits 5 gal coolers
|
$16.00 |
|
10”
PHALSE BOTTOM Fits 5 or 6 gallon buckets
|
$17.00 |
|
12”
PHALSE BOTTOM Fits 10 gal cooler for lauter tun
|
$19.95 |
|
HEXTER
FILTER
|
$45.00 |
|
SPARGE
ARM Advanced Brewing Co
|
$36.95 |
|
STAINLESS
FALSE BOTTOM Made from 18 gauge stainless. Contoured
to fit a Sanke Keg. 11.5” in diam. Includes a flared
dip tube to eliminate dislodging when stirring mash.
|
$37.95 |
|
STAINLESS
FALSE BOTTOM Made for the PolarWare 40 qt. Stainless
Pot. Very high quality.
|
$76.95 |
|
Back to
Top
Mini Brew Conical Fermentation System
This unique system is modeled after
very expensive stainless conical fermentation systems. It is made
of thick durable plastic and may be fitted with a stainless dial
thermometer and other parts. The 5.5 gallon conical fermentor is
housed in a rigid base so if (and when) the fermentation overflows
it runs down into the base, preventing a mess. New on the market.
Looks very cool!
| Description |
Price |
Add to Cart |
BASIC CONICAL FERMENTOR
|
$155.00 |
|
SYSTEM WITH STAINLESS
THERMOMETER
|
$188.00 |
|
THERMOMETER
|
$42.00 |
|
CONICAL FERMENTOR, 12
GAL
|
$235.00 |
|
CONICAL FERMENTOR, 12
GAL, With Thermometer
|
$260.00 |
|
Contact:
Phone: (800) 657-5199 or
Local: (608) 257-0099
|
Wine & Hop Shop
1931 Monroe Street
Madison, WI 53711 |
David Mitchell, Owner
|
|
|
